NBN Dropouts - FTTN/FTTB/FTTC
In 2014 the Australian Government made the decision to use a mixed technology approach to the NBN rollout. This means that certain properties will use
parts of the old legacy copper telephone network to complete the NBN connection to your property. This legacy copper network is unfortunately prone
to issues and we encounter some users using FTTN/FTTB and FTTC technologies experiencing connection dropouts due to this.
It is important to troubleshoot your FTTN/FTTB/FTTC connection prior to us logging a fault to NBN Co as in certain cases it is local internal copper wiring that can be causing the dropout issues.
In order to properly troubleshoot you should consider the following scenarios:
1. Only a single device is dropping out and other devices are not affected.
In this case it is likely an issue with a particular device. We recommend checking and replacing any network cabling used for this device. If the device is connecting via wifi, ensure that the device is within wifi range and try connecting it directly to your modem using a network cable.
2. All devices are dropping out at the same time.
In this case it is likely an issue with your NBN service. We recommend completing the following troubleshooting steps before calling us to raise the fault up to NBN:
a) Take a note of the date, time and duration that your service is dropping out. We may need this later if a fault needs to be raised to NBN Co.
b) Ensure that your modem is connected in isolation and directly to the primary telephone wall socket in your property. To do this remove any filters, splitters and telephone extension cables and connect the modem directly to the primary telephone wall socket inside your property. Also ensure that any traditional telephones are disconnected from other wall sockets inside your property. You may wish to replace the telephone cable used to connect your modem to the wall socket if this is not brand new.
c) Test an alternative modem. There is around a 40% chance that the modem could be the issue. NBN Co also insist on seeing at least two
different MAC addresses from different devices before engaging a field technician to attend site to check your line. As such it is important to try
an alternative modem to see if this resolved your issues. If you've purchased a modem from us our manufacturer provides a 12 month warranty. We understand
that it is sometimes hard to find another modem to test but this does help massively during the troubleshooting process. If your modem is deemed DOA
(dead on arrival) the manufacturer will ship a new modem in advance with a return satchel. If it is beyond 30 days they require troubleshooting to
be perform so we can generate a return reference for warranty replacement.
d) If the above does not resolve your dropout issue it is recommended to engage an ACMI qualified telephone technician to isolate the main telephone socket within the property (we recommend Mr Telco as a national provider of ACMI qualified technicians). This work involves disconnecting any additional wall sockets in your property so that your connection does not incur interference with the VDSL signal bouncing off unused telephone sockets in your home. By having unused sockets in your house connected to your main socket, the VDSL signal will reflect back down the wire and cancel the signal on your primary socket – causing a dropout. We also recommend replacing the lead in cable from the boundary of your property to your primary telephone socket with new copper wire. This internal cabling work is quite common and in April 2019 (at the time of writing) the shadow Labor Government announced a policy to replace or repair internal wiring for FTTN connected homes.
e) If after working through all the above steps there could be an issue with the NBN line running to your property. Please get in touch with our technical team with details of your drop outs since the above steps have been undertaken and we will arrange for an NBN technician to check your line back to the node or point of connection to NBN.
< Go Back
Recent Help Articles
- Thanks for your XXL Upgrade Request.
- Have a Need for Speed? Upgrade Special Offer
- NBN Dropouts - FTTN/FTTB/FTTC
- Do I need to cancel my old NBN service when transferring to Tangerine?
- Why is my NBN running slow?
- Can I put my NBN service "on hold"?
- Roaming Travel Pack
- Does Tangerine charge a speed change fee?
- Can I set up a reverse DNS record (PTR record) with my Tangerine NBN plan?
- Risk Free 14 Day Trial Terms and Conditions
6 Refreshingly Good Reasons to Sign Juice-Up
14 Day Risk Free Trial
Just cancel if you're not satisfied
No Lock In Contracts
We're confident you'll love it
No Set Up Fees
We get you up and running quickly
Crack on, download that movie
Super Quick Answer Times
Industry leading and fast
7 Day Technical Support
We're here for you, weekends included
NBN Rollout Map
Check if you can get connected at your address
(Hold tight! It takes a moment to load...)